| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Transport Package: | Poly Case |
| Specification: | Metal |
| Trademark: | Weshine |
| Origin: | Hebei, China |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier As an insulating gas, SF6 gas is non-toxic, non-flammable, and has good insulating properties. Its insulating strength is much higher than that of traditional insulating gas, and it has good arc extinguishing properties, so it is widely used in SF6 electrical appliances. Because SF6 gas is expensive, and under the action of arc, spark and corona discharge, it will decompose to produce toxic components. Therefore, SF6 gas needs to be recovered in the application of SF6 electrical equipment. The sf6 gas recovery device is a special equipment for recovering and filling SF6 gas when manufacturing and maintaining SF6 electrical equipment.
The sf6 gas recovery device is suitable for vacuuming, charging, recharging, purification and recovery of sulfur hexafluoride gas in SF6 electrical equipment.
The sf6 gas recovery unit is composed of SF6 gas recovery unit. The main advantages of the products involved are that the recovered SF6 gas can be directly stored in the container in the form of liquid, and the residual pressure in the GIS can be recovered to 53Kpa (absolute pressure), which has a small volume and is easy to move. The faster vacuuming speed can dry and filter the recovered SF6 gas, and can also recharge the SF6 gas to the SF6 electrical equipment.
| Recovery | Initial recovery pressure≤0.8MPa Recovery final pressure≤50KPa Recovery time: for a volume of 1 m3 SF6 gas with an initial pressure of 0.8MPa, recovery to the end Pressure 50KPa, recovery time less than 2.5 hours |
| Inflation | Inflate the volume of 1 m3 SF6 gas with an initial pressure of 133Pa to 0.8MPa. |
| Annual leakage rate | ≤1% of nominal storage capacity |
| Noise | ≤75dB(A) sound pressure level |
| Working ambient temperature | -10ºC- 40ºC, Power supply AC three-phase five-wire system 50Hz 400V±10% |
| Power | ≤5kW |
| Dimensions (L×W×H) | 1450×810×1200mm3 |
| The annual leakage rate of the device | <1% |
1. Built-in phase sequence protector, which can avoid the worry of the host being reversed due to wrong phase sequence at any time.
2. All electrical systems use high-quality brands.
3. High-quality casters will greatly protect the ground paint and reduce the labor required for pushing.
4. The whole machine is air-cooled, no external water source is required.
5. The built-in temperature protection system can work normally even at -20 degrees Celsius.
6. The built-in drying and heating system ensures that the desiccant can be activated and regenerated by heating after the desiccant is saturated, so there is no need to replace the desiccant.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}