Automatic Instrument Current Transformer Analyzer CT PT Characteristics Tester Analyzer

• After-sales Service: 1 Year
• Warranty: 1year
• Max Diameter of Workpiece: 3000mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: VS-6309A
• Mass Scope of Workpiece: <900kg
• Type: Balancing Machine
• Maxcapacity: >1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Certificate: CE
• Transport Package: Carton
• Trademark: WESHINE
• Origin: China
• HS Code: 9027100090
• Production Capacity: 500000pic/Year
• Package Size: 40.00cm * 35.00cm * 38.00cm
• Package Gross Weight: 38.000kg

Product Description

Product Description
 

The need for a comprehensive current transformer testing regime is evident when the alternative is considered: a catastrophically damaging current transformer fault. A fault leading to an open secondary could cause the primary current to overwhelm the insulation, causing the winding to short circuit. WESHINE's range of current transformer test equipment allows you to construct an in depth test and maintenance programme to prevent problems before they occur.

A routine series of diagnostics and testing for your current transformer should include CT saturation testing to identify the knee point against IEEE or IEC standards, CT ratio tests to identify that the voltage ratio is within expected parameters and current transformer resistance testing for both the transformer windings and CT insulation resistance testing.

Saturation testing for a current transformer identifies the rated knee point against IEEE or IEC standards, the point at which the transformer is no longer able to output current in proportion to its specified ratio.

Ratio tests under normal load are achieved by comparing voltage applied to the secondary winding against the resulting voltage produced on the primary winding. Current transformer resistance tests inject test voltage to measure the DC current and calculate the resistance with allowance for temperature. 

FEATURES:

*Power frequency 
* 0 ~ 220 Vrms, 5 Arms, peak: 20 A 
* Current output up to 150A 
* Performs Secondary Burden tests

* Variable frequency effective avoid the iron core resonance causes overvoltage.
* Less than 16 lb (8Kg), smallest and lightest unit on the market.
* Especially suitable for the test of Transient Current Transformer.
 

PRODUCT INFORMATION
Product Name	PT and CT Analyzer (Power frequency)
Output	0 ~ 220 Vrmas, 5 Arms	Output Current	0 ~ 150 A
CT grouped testing	* Demagnetization, Knee Points, Ratios, Saturation Curves, Winding Resistances, Polarities and Phase Deviation...
VT testing	* Demagnetization, Ratios, Winding Resistance, Polarity and Phase Deviation...
Weight	≤ 8 kg	Certificates	CE; EMC; LVD; ISO; IEC;
Dimensions		Model Number	VS-2800