Weshine 2800 series CT PT Analyzer current transformer testing Ct Ratio Tester Volt-ampere Characteristic Ct Primary Tester

• Customization: Available
• After-sales Service: 24/7 Online Service
• Warranty: 1year
• Model NO.: VS-2800
• Display Type: Analogue and Digital
• Certification: CE
• Customized: Customized
• Certificate: CE
• Current Output: 0 ~ 150 a
• CT Ratio Measurement Range: 1-10000
• CT Ratio Measurement Accuracy: 0.5%
• PT Ratio Measurement Range: 1-10000
• PT Ratio Measurement Accuracy: 0.1%
• Dimensions: 380 X 240 X 180 mm
• Weight: ≤8 Kg
• Transport Package: Wooden Box with Foam Inside
• Specification: VS-2800A: VT and CT Analyzer (variable frequency)
• Trademark: WESHINE
• Origin: China
• HS Code: 9027100090
• Production Capacity: 500000pic/Year

Product Description

Product Description

Weshine 2800 series CT PT Analyzer current transformer testing Ct Ratio Tester Volt-ampere Characteristic Ct Primary Tester

Weshine's range of Current Transformer Test Equipment allows you to construct an in depth test and maintenance programme to prevent problems before they occur.

The need for a comprehensive current transformer testing regime is evident when the alternative is considered: a catastrophically damaging current transformer fault. A fault leading to an open secondary could cause the primary current to overwhelm the insulation, causing the winding to short circuit. 

A routine series of diagnostics and testing for your current transformer should include CT saturation testing to identify the knee point against IEEE or IEC standards, CT ratio tests to identify that the voltage ratio is within expected parameters and current transformer resistance testing for both the transformer windings and CT insulation resistance testing.

Saturation testing for a current transformer identifies the rated knee point against IEEE or IEC standards, the point at which the transformer is no longer able to output current in proportion to its specified ratio.

Ratio tests under normal load are achieved by comparing voltage applied to the secondary winding against the resulting voltage produced on the primary winding. Current transformer resistance tests inject test voltage to measure the DC current and calculate the resistance with allowance for temperature. 

FEATURES:

*Power frequency 
* 0 ~ 220 Vrms, 5 Arms, peak: 20 A 
* Current output up to 150A 
* Performs Secondary Burden tests

* Variable frequency effective avoid the iron core resonance causes overvoltage.
* Less than 16 lb (8Kg), smallest and lightest unit on the market.
* Especially suitable for the test of Transient Current Transformer.
 

PRODUCT INFORMATION
Product Name	VT and CT Analyzer (variable frequency)
Output	0 ~ 220 Vrmas, 5 Arms	Output Current	0 ~ 150 A
CT grouped testing	Demagnetization, Knee Points, Ratios, Saturation Curves, Winding Resistances, Polarities and Phase Deviation...
VT testing	Demagnetization, Ratios, Winding Resistance, Polarity and Phase Deviation...
Weight	≤ 8 kg	Certificates	CE; EMC; LVD; ISO; IEC;
Dimensions	380mm*180mm*240mm	Model Number	VS-2800A

Recommend Products

VS-2088

VT AND CT ANALYZER (POWER FREQUENCY)

* Power frequency (50Hz)

* 0 ~ 2500 Vrms, 5 Arms, peak: 20 A * Current output up to 1000A * Performs Secondary Burden tests

Typical application:

* CT grouped testing includes Demagnetization, Knee Points, Ratios, Saturation Curves, Winding Resistances, Polarities and Phase Deviation...
* VT testing including Demagnetization, Ratio, Winding Resistance, Polarity and Phase Deviation...

VS-2088A

VT AND CT ANALYZER (VARIABLE FREQUENCY)

 

* Variable frequency

* 0 ~ 220 Vrms, 5 Arms, peak: 20 A

* Current output up to 150A

* Performs Secondary Burden tests

Upgraded on the basis of VS-2800:

* Variable frequency effective avoid the iron core resonance causes overvoltage.

* Less than 16 lb (8Kg), smallest and lightest unit on the market.
* Especially suitable for the test of Transient Current Transformer.

VS-6628 SERIES

TURNS RATIO TESTER
 

* Single- or 3-phase turns ratio

* Polarity and phase angle deviation

* Unmatched accuracy (±0.1%)

Its aids in identifying:

* Shorted coils
* Open circuits
* Incorrect connections
* Internal faults or tap-changer defects in step regulators as well as in transformers

 

Feedback

Company Profile