Advanced Oil TAN and TBN Total Acid Base Number Analyzer

Product Description

Product Description

 TAN (Total Acid Number)

A common misconception is that a TAN oil analysis is used to determine the acidic strength of an oil. Actually, TAN oil testing is used to find out the amount of acidic components present within the oil, i.e. the acidic concentration. To put this into context, a single molecule of animal fat would give the same TAN reading as a single molecule of hydrochloric acid, even though hydrochloric acid is by far the most corrosive of the two. Indeed, the acid present within a synthetic turbo oil is about the same strength as household vinegar!

TAN Oil analysis is crucial to maintaining the mechanical integrity of equipment and to prevent internal damage to components. An oil's TAN will increase with the passage of time or if exposed to high running temperatures - the oil becomes oxidised (high temperatures cause oil molecules react with the oxygen within the air). Oxidation severely affects an oil's ability to protect internal components and can also affect the viscosity.

In synthetic turbo oils, hydrolysis (a chemical reaction involving water) can also cause an increase in the TAN, especially when the oil is subject to heat.

The TAN is defined as the weight (in milligrams) of a standard base (e.g. potassium hydroxide, KOH) that's required to neutralise all of the acidic components within the oil. Its unit is mg KOHg-1 (milligrams of KOH per gram).

For TAN we work to D664 (Equivalent to IP177)

TBN (Total Base Number)

Oils are continually exposed to acidic compounds which cause the oil to turn more acidic. This is particularly true of crankcase oils. In an attempt to combat this problem, manufacturers give the oil a 'reserve alkalinity' which is designed to 'cancel out' any acidity which forms in the oil during use. The TBN determines how effective the battle will be against any acids formed during the combustion process. A higher TBN means the oil has more reserve alkalinity available which can be used to reduce the corrosive effects of acids.

A low TBN can also reduce the detergency of an oil and can therefore lead to fouling within the crankcase.

As a general rule of thumb, if the TBN is measured at 2.0mg KOH g-1 or less, or if it's 50% of the virgin oil TBN, the oil is considered unfit for engine protection and there is a risk that corrosion could take place. The use of a high sulphur fuel will decrease the TBN at a faster rate due to the increased formation of sulphuric acid.

For TBN We work to IP400 & ASTM D2896
 
Weshine invented TAN and TBN Oil Analysis System(VS-9816) of oil products conforms to the standards: GB/T264, GB7599-87, GB/T7304-2000, GB/T 18609-2001, D664-01, ASTM D664-2011. It adopts the principle of potentiometric titration. By recording the electrode potential and titration volume during the titration process, find out the equivalence point and the corresponding volume of the standard titration solution, so as to obtain the TAN and TBN in the sample. VS-9816 can accurately detect the TAN and TBN of petroleum products such as transformer oil, turbine oil, anti-fuel oil, diesel oil, gasoline, etc. It is widely used in chemical, electric power, petroleum and other industries, and is an ideal replacement product for the current petroleum product acid value tester.

Feedback

Recommend Products

Company Profile