Portable TDR cable tester location system 33kV hv cable fault locator underground cable wire locator
Product Details
| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Function: | Storage |
Manufacturer/Factory & Trading Company
360° Virtual Tour
Diamond Member Since 2022
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cooperated with Fortune 500
Years of Export Experience
Exhibition Experience
Management Certification
This supplier has Cooperated with Fortune 500 companies
The export experience of the supplier is more than 10 years
The supplier had participated in offline trade shows, you can check the Audit Report for more information
The supplier has quality management system certification, including:
ISO9001:2015 certificate
ISO14001
ISO45001:2018 certificate
GB/T 27922-2011 standard Five stars grade
ISO9001:2015 certificate
ISO14001
ISO45001:2018 certificate
GB/T 27922-2011 standard Five stars grade
Sign In to see all verified strength labels (26)
Find Similar Products
Basic Info.
- Model NO.
- VS-2088
- Display
- Digital
- Type
- Resistance Tester
- Environment
- High and Low Temperature
- Warranty
- With Warranty
- Power Source
- DC 100V-300V
- Weight
- 0-10Kg
- Installation
- Direct Connected
- Customized
- Customized
- Output Voltage
- 30kv ~ 90kv
- Output Frequency
- 0.1Hz, 0.05Hz, 0.02Hz
- High Test Capacity
- 5.5μf
- Measuring Length Range
- Over-Current Protection.
- Measuring Method
- Low-Voltage Pulse Method, Flash Current Method, Mu
- Blind Spots
- 0 ~ 5m or No Blind Spots
- Certification
- CE; EMC; LVD; ISO;
- Standby Time
- Can Be Used Continuously for About 6 Hours
- Control Unit Weight
- 7kg
- Transport Package
- Carton Box Wooden Case
- Specification
- Customized
- Trademark
- WESHINE
- Origin
- Hebei China
- HS Code
- 9004901000
- Production Capacity
- 2000
Product Description
Portable TDR cable tester location system 33kV hv cable fault locator underground cable wire locator
Electricity networks have had to become more flexible, reacting more quickly to the changes and needs of higher performance. This demand for flexibility is especially true where multiple generation sources occur, such as the intermittent power from renewables like solar and wind energy. While modern SMART grid technology can quickly identify faults in sub-station and generating units, cable faults can still occur anywhere on the network. Quickly locating a cable fault for repair is the top priority for avoiding lengthy restoration times. In the first place, this will be especially impactful on electrical utility reliability indices. These indices include SAIDI, the System Average Interruption Duration Index, which measures the total duration of an interruption for the average customer during a certain time period, and SAIFI, the System Average Interruption Frequency Index, which is found by dividing the total number of customers interrupted by the total number of customers served.
Company Profile:
Cable fault location is required anywhere where the fault cannot be seen, this is a multi-step process that must be performed as safely and as quickly as possible because customers will be without power.
Step 1 - Cable Isolation & Safety Procedures: A cable fault is nearly always a permanent fault. This means that the cable in question will be in a condition where the protection devices at one or both ends of the cable will have tripped, leaving the cable isolated but NOT earthed (grounded). The first task is for the Authorised Person for the site to make the cable safe by isolating and then earthing (grounding) one or both ends preferably. Only after the appropriate procedures have been carried out can any testing personnel be allowed to approach the cable and prepare for testing.
Step 2 - Cable Identification: Where multiple cables exist, cable identification testing will identify the correct cable to work on. Clear identification before a cable is cut is intrinsic to safe maintenance work. Any mistakes here can be fatal, and may cause much longer outages for the connected customers
Step 3 - Cable tracing: When an underground cable is first laid it rarely runs in a straight line, but rather meanders in depth and direction. Cable tracing is done to determine that the route of the cable is following the expected path.
Step 4 - Fault identification: The first major procedure is to determine the phase on which the fault has occurred, and if it is of low or high resistance. This test determines the correct technique and equipment to diagnose the fault. Typically, if the fault is found to be below 100 Ohms, a low voltage pulse (e.g., 40 V) from a TDR (time domain reflectometer) can be used. If the fault is a higher resistance (> 100 Ohm), a low voltage pulse will likely not see it. For these types of faults, an Impulse generator (shock discharge) will be necessary.
Step 5 - Fault prelocation: A reliable and precise pre-location method is necessary to locate a cable fault quickly and efficiently. Good pre-location can determine the fault position to within a few percent of the cable length and will reduce pinpointing time to a few minutes. Remember: a). If it is a low resistance fault, pre-location was likely to be the only means necessary for location. b). For high resistance faults, ARM (arc reflection) or ICE (impulse current) techniques on an SWG (surge wave generator) should be used. Alternatively, the decay method with an HV DC tester (bridge), can be used for pre-location.
Step 6 - Pinpointing: The aforementioned test methods will get the operator with 5% distance of the fault, acoustic pinpointing techniques must be employed to narrow the margin of error to 0.1%. In most cases, shock discharge generators are used for pinpointing in conjunction with acoustic methods. The discharge creates a loud noise, which is pinpointed precisely using an acoustic pinpointing device. This device evaluates the time difference between the acoustic signal (speed of sound) and the electromagnetic (nearly the speed of light) impulse of the shock discharge. When the shortest time difference is indicated, the exact fault location is revealed.
Step 7 - Re-energisation of the cable: Once all testing and repairs are completed, the Safety/Testing Documentation is cancelled. the cable is then handed back to the appropriate operators to reinstate the cable and re-energise the loads on the newly repaired cable.
Step 1 - Cable Isolation & Safety Procedures: A cable fault is nearly always a permanent fault. This means that the cable in question will be in a condition where the protection devices at one or both ends of the cable will have tripped, leaving the cable isolated but NOT earthed (grounded). The first task is for the Authorised Person for the site to make the cable safe by isolating and then earthing (grounding) one or both ends preferably. Only after the appropriate procedures have been carried out can any testing personnel be allowed to approach the cable and prepare for testing.
Step 2 - Cable Identification: Where multiple cables exist, cable identification testing will identify the correct cable to work on. Clear identification before a cable is cut is intrinsic to safe maintenance work. Any mistakes here can be fatal, and may cause much longer outages for the connected customers
Step 3 - Cable tracing: When an underground cable is first laid it rarely runs in a straight line, but rather meanders in depth and direction. Cable tracing is done to determine that the route of the cable is following the expected path.
Step 4 - Fault identification: The first major procedure is to determine the phase on which the fault has occurred, and if it is of low or high resistance. This test determines the correct technique and equipment to diagnose the fault. Typically, if the fault is found to be below 100 Ohms, a low voltage pulse (e.g., 40 V) from a TDR (time domain reflectometer) can be used. If the fault is a higher resistance (> 100 Ohm), a low voltage pulse will likely not see it. For these types of faults, an Impulse generator (shock discharge) will be necessary.
Step 5 - Fault prelocation: A reliable and precise pre-location method is necessary to locate a cable fault quickly and efficiently. Good pre-location can determine the fault position to within a few percent of the cable length and will reduce pinpointing time to a few minutes. Remember: a). If it is a low resistance fault, pre-location was likely to be the only means necessary for location. b). For high resistance faults, ARM (arc reflection) or ICE (impulse current) techniques on an SWG (surge wave generator) should be used. Alternatively, the decay method with an HV DC tester (bridge), can be used for pre-location.
Step 6 - Pinpointing: The aforementioned test methods will get the operator with 5% distance of the fault, acoustic pinpointing techniques must be employed to narrow the margin of error to 0.1%. In most cases, shock discharge generators are used for pinpointing in conjunction with acoustic methods. The discharge creates a loud noise, which is pinpointed precisely using an acoustic pinpointing device. This device evaluates the time difference between the acoustic signal (speed of sound) and the electromagnetic (nearly the speed of light) impulse of the shock discharge. When the shortest time difference is indicated, the exact fault location is revealed.
Step 7 - Re-energisation of the cable: Once all testing and repairs are completed, the Safety/Testing Documentation is cancelled. the cable is then handed back to the appropriate operators to reinstate the cable and re-energise the loads on the newly repaired cable.
Electricity networks have had to become more flexible, reacting more quickly to the changes and needs of higher performance. This demand for flexibility is especially true where multiple generation sources occur, such as the intermittent power from renewables like solar and wind energy. While modern SMART grid technology can quickly identify faults in sub-station and generating units, cable faults can still occur anywhere on the network. Quickly locating a cable fault for repair is the top priority for avoiding lengthy restoration times. In the first place, this will be especially impactful on electrical utility reliability indices. These indices include SAIDI, the System Average Interruption Duration Index, which measures the total duration of an interruption for the average customer during a certain time period, and SAIFI, the System Average Interruption Frequency Index, which is found by dividing the total number of customers interrupted by the total number of customers served.
|
PRODUCT INFORMATION
|
|||
|
Product Name
|
Split-type Cable Fault Location System
|
||
|
Model Number
|
VS-2088
|
Certificates
|
CE; EMC; LVD; ISO;
|
|
Measuring Distance
|
60 km
|
Blind Area
|
<1 m
|
|
Measuring Method
|
Low-voltage pulse method, flash current method, multiple pulse method.
|
||
|
Product Function
|
Locate cable faults below 35 kV.
|
||
|
Typical Application
|
Power cable, street lamp cable, airport signal cable, railway communication control cable...
|
||
Company Profile:
What should you do when there are cable faults?
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Cable testing
- Vehicle Mount Cable Fault Location System
- Portable TDR cable tester location system 33kV hv cable fault locator underground cable wire locator
Related Categories
Hot Searches
More