3 Waveforms 400kV 800kV 1200kV HV Lightning Impulse Voltage Generator Withstand Voltage Tester Price
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | 24/7. All Time Zones Friendly |
| Warranty: | 1 Year |
360° Virtual Tour
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ISO9001:2015 certificate
ISO14001
ISO45001:2018 certificate
GB/T 27922-2011 standard Five stars grade
Find Similar Products
Basic Info.
- Model NO.
- VSJC-Y400
- Product Name
- Lightning Impulse Voltage Generator
- Ray waves
- ≥85%
- Operating wave
- ≥80%
- Nominal voltage
- 300 kV to 4800 kV
- Rated voltage
- ± 150kV to 1200 kV
- Rated capacitance
- 0.325 to 1.0 μF
- Impact energy
- 7.31 to 480 kJ
- Transport Package
- Wooden Box with Foam Inside
- Specification
- VSJC-Y400: Lightning Impulse Voltage Generator
- Trademark
- Weshine
- Origin
- China Hebei
- HS Code
- 8504210000
- Production Capacity
- 300 Pieces/Per Month
Product Description
Lighting is a common phenomenon in transmission lines because of their tall height. This lightning stroke on the line conductor causes impulse voltage. The terminal equipment of transmission line such as power transformer then experiences this lightning impulse voltages. Again during all kind of online switching operation in the system, there will be switching impulses occur in the network. The magnitude of the switching impulses may be about 3.5 times the system voltage. Insulation is one of the most important constituents of a transformer. Any weakness in the insulation may cause failure of transformer. To ensure the effectiveness of the insulation system of a transformer, it must confirms the dielectric test. But the power frequency withstand test alone can not be adequate to demonstrate the dielectric strength of a transformer. That is why impulse test of transformer performed on it. Both lightning impulse test and switching impulse test are included in this category of testing.
* Front of wave
establish a minimum impulse dielectric strength of a transformer.
If lighting disturbance travels some distance along the transmission line before it reaches the transformer, its wave shape may approach to full wave. If during traveling, if flash-over occurs at any insulator of the transmission line, after the peak of the wave has been reached, the wave may become in form of chopped wave.
The effect of these waveforms on the transformer insulation may be different from each other. We are not going here in detail discussion of what type of impulse voltage waveforms causes what type of failure in the transformer. But whatever may be the shape of lightning disturbance voltage wave, all of them can cause insulation failure in the transformer. So lighting impulse test of transformer is one of the most important type test of transformer.
For further information on Weshine's Service Solutions, contact our 24/7 online sales representative.
|
Product Name
|
Lightning Impulse Voltage Generator
|
||
|
Model Number
|
VSJC-Y400
|
||
|
Nominal Voltage
|
300 to 4800 kV
|
Rated Voltage
|
± 150 ~ 1200 kV
|
|
Rated Capacitance
|
0.325 to 1.0 μF
|
Impact Energy
|
7.31 to 480 kJ
|
|
Ray Waves
|
≥85%
|
Operating Wave
|
≥80%
|
|
Typical Application
|
Testing of:
Power transformer, Cable, Arrester(impact current test), Generator, Motor, Insulator, Casing, GIS, Transformer, Capacitor, Other insulating materials, Scientific research and teaching
|
||





Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Insulation testing
- DC Hipot Tester
- 3 Waveforms 400kV 800kV 1200kV HV Lightning Impulse Voltage Generator Withstand Voltage Tester Price